This is a job where hail damage destroyed the integrity of the roof. It now has been restored to its original look.
A. This is the original installation of a tile roof on an institution.
B. The people of concern thought enough of our original work, to call us back ten years later, after a tornado had hit the roof.
C. This is the process it took to complete the repair.
A.This chimney and its flashing were a source of leaks for the owner. The problem was broken tile and poor caulked flashings, as well as breakdown of the original flashings after 60 years.
B.We removed tile + installed new 16 ounce lead coated copper flashings, saddles, and counter flashings. Please note how neat the step/flashings renewed are, and the storage of ile removed for replacement of the saddles. i.e. Functiona l flashing between chimney and tile roof.
C.This is the final appearance after the repair and restoration. Notice the new flashing in place and the broken tiles replaced that were to the left of the chimney in picture "A" as shown by the arrow.
A.This is one of our restoration jobs. After the chimney was rebuilt we replaced the cooper flashings. We also cleaned off the slate roof as seen on the picture.
B.We cleaned off the surface dirt of this roof as noted.
A.The tile roof as pictured was repaired some 20 years ago with mismatched tiles and improper installation procedures after a tree had fallen on this area. This allowed water entry that broke down the underlayment quickly and caused interior wall damage.
B.This is the corrective procedure that we took in the repair process using scaffolding and equipment as necessary.
C.The job at this stage is almost complete. We replaced the tile with matching tile and installed new underlayment and flashings in proper
order to correct the problem.